A two component high performance epoxy primer and undercoat for use both above and below the waterline. Use on glassfibre, wood, steel and aluminium. Superb corrosion, impact and water resistance. Use before Ocean Gloss/PolyGloss/Brilliant Gloss topcoat for a long-lasting solution. Can also be used for osmosis protection when application is required at low temperatures.
Minimum Application Temperature : 5°c
Application Methods : 
| Temp | Touch Dry | Recoat (min/max) | Thinners / Tool Cleaner | Coverage |
| 10°c | 8 hrs | 8 hrs - 60 days | Thinners No: 5 | 8.2 m2/ltr |
| 20°c | 4 hrs | 4 hrs - 30 days | | 8.2 m2/ltr |
Available Colours* :
Preparation & Application
Ensure all surfaces are clean, oil free and dry. Cleaning with appropriate cleaner and rinse with fresh water and allow to dry.
Previously Coated Surfaces
Abrade, clean and dry surface. Apply 3 coats of the product thinned 5% followed by chosen topcoat
Previously Uncoated Surfaces
Prime porous surfaces with first coat of the product thinned 20% with recommended thinner. Finally apply 3-5 coats of the product thinned 5%. Overcoat with chosen tiecoat and antifouling
For further information on technical and safety information please refer to files provided in the technical and safety tab above
The colour's shown should be used as a guide only due to the varying degrees in monitor colour management
