Aerosol. An anti-corrosive primer for a large variety of substrates. Particularly recommended as a primer for outdrives and propellers. Prop Primer has very good adherence to most substrates. Fast drying, easy to apply with a matt finish. Overcoat with Mille Drive or appropriate antifouling Gel/High protect.
Minimum Application Temperature : 5°c
| Temp | Touch Dry | Recoat (min/max) | Thinners / Tool Cleaner | Coverage |
| 10°c | 40 min | 2 hrs - none | none | 3.5 m2/ltr |
| 20°c | 20 min | 1 hrs - none | | 3.5 m2/ltr |
Available Colours* :
Surface Preparation
Wash the area and rinse with fresh water. It is recommended to carry out sanding of the surface with sandpaper size 80-120 in order to assure optimum adhesion to the substrate.
Applications on existing coats: Before repainting a propeller it should be degreased followed by fresh water hosing. The old layers of antifouling and any primer in poor condition should be removed. Dust off residues. Apply a layer the product on the areas where the substrate is visible.
For further information on technical and safety information please refer to files provided in the technical and safety tab above
The colour's shown should be used as a guide only due to the varying degrees in monitor colour management
