Hempel's Epoxy Filler 35253: The High-Performance Solution for Filling and Fairing
Hempel's Epoxy Filler 35253 is a two-component, solvent-free epoxy filler designed for filling cracks, fissures, and minor imperfections. This high-performance filler is suitable for use on various substrates, including fibreglass, wood, and steel. Its versatility and ease of application make it an ideal choice for both professional and DIY boat repair and maintenance projects.
Key Features
- Versatile Application: Ideal for filling cracks, fissures, and minor imperfections on fibreglass, wood, and steel.
- Solvent-Free: Environmentally friendly formula with ultra-low VOC content.
- High-Performance: Creates a strong and durable surface for subsequent coatings.
- Easy Application: Can be applied using a spatula for precise and controlled filling.
- Sandable: Can be sanded to a smooth finish for a seamless repair.
Application Information
- Surface Preparation: Ensure surfaces are clean, dry, and free from contaminants. Clean the surface and remove possible oil and grease with a suitable detergent and sand with dry abrasive paper.
- Priming: If the substrate is uncoated, sand and remove all dust. Prime with 1-2 coats of the specified Hempel primer. If previously coated, abrade, clean, and dry the surface.
- Mixing Ratio: Mix Base 35259 and Curing Agent 95250 in a 1:1 ratio by volume.
- Application Methods: Apply using a spatula.
- Conditions: The surface must be completely clean and dry at the time of application and its temperature must be above the dew point to avoid condensation. Do not apply in direct sunlight. In confined spaces, provide adequate ventilation during application and drying.
Technical Specifications
- Colour: Light Grey
- Gloss Level: Flat
- Volume Solids: 100%
- Specific Gravity: 1.6 kg/L
- Dry to Touch: 8 hours at 20°C
- Dry to Sand: 16 hours at 20°C
- Fully Cured: 5 days at 20°C
- VOC Content: 10 g/L
Additional Information
- Compatibility: Can be overcoated with Hempel's Light Primer or Hempel's Primer Undercoat.
- Technical and Safety Data: For comprehensive information, please refer to the technical and safety data sheets.
Application Methods : Spatula / Spreader
The colours shown should be used as a guide only due to the varying degrees in monitor colour management.
Need more help? Contact us for expert advice on selecting and applying the right antifouling system for your boat.
